Sharp MX-2610N User Manual Download Page 219

Page: 219 / 1312

OPERATION GUIDE - COPYING MULTIPLE ORIGINALS ON EACH PAMPHLET COPY PAGE

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/02-027b.htm[24/03/2011 2:57:34 PM]

MX-2610N / MX-3110N / MX-3610N

COPYING MULTIPLE ORIGINALS ON EACH

PAMPHLET COPY PAGE

Pamphlet copy

2in1/4in1

COPYING

steps in all >

Select the binding edge.

To cancel the pamphlet staple

settings

Tap the [Off] key.

Tap the [1-Sided] or [2-

Sided] key to meet the
original.

When not inserting a cover, go to step 6.

Place the original and tap the [Preview] key.

Place the original in the document feeder tray of the automatic document feeder, or on the

document glass.

AUTOMATIC DOCUMENT FEEDER

DOCUMENT GLASS

If the originals are 2-sided, place them in the document feeder tray.

Tap the [Others>>] key, and tap the [Pamphlet Copy] key.

When inserting a cover, tap the [Cover Setting] key, and tap

the [On] key.

To change the cover input tray:

Tap the [Paper Tray] key to display the tray selection screen.

Tap the cover input tray on the tray selection screen.

For more information, see "SELECTING THE PAPER TRAY FOR COPYING".

To make a copy on a cover sheet, check the [Make Copy on Cover (Duplex)]

box so that

appears.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 219 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: