Sharp MX-2610N User Manual Download Page 816

Page: 816 / 1312

OPERATION GUIDE - CHANGING THE PRINT SETTINGS FOR THE TRANSACTION REPORT

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/05-066a.htm[24/03/2011 3:02:21 PM]

MX-2610N / MX-3110N / MX-3610N

CHANGING THE PRINT SETTINGS FOR

THE TRANSACTION REPORT

Transaction report

Index

Contents

Operation

IMAGE SEND

A transaction report is automatically printed out to alert you when an Internet fax transmission

fails or when a broadcast transmission is performed.

The transaction report contains a description of the transmission (date, start time, name of

destination, time required, number of pages, result, etc.).

INFORMATION APPEARING IN THE RESULT COLUMN

Transaction reports are printed based on conditions set in the setting mode. Select different

conditions for a transmission as required.

This function cannot be used in scan mode or data entry mode.

For a broadcast transmission, changes to the transaction report print conditions

apply to all destinations.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 816 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: