Sharp MX-2610N User Manual Download Page 727

Page: 727 / 1312

OPERATION GUIDE - CHANGING THE SUBJECT, FILE NAME, AND BODY TEXT AT THE TIME OF INTERNET FAX TRANSMISSION

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/05-031a.htm[24/03/2011 3:01:36 PM]

MX-2610N / MX-3110N / MX-3610N

CHANGING THE SUBJECT, FILE NAME, AND BODY TEXT AT

THE TIME OF INTERNET FAX TRANSMISSION

Index

Contents

Operation

IMAGE SEND

Change the subject, file name, and body text when performing an Internet fax transmission. If

necessary, directly enter the text. Configure a file name, and other settings for an Internet fax

using the Send Settings of the other functions.

If the subject and file name are not changed, the settings in the Setting mode (Web

version) are used.

To configure the candidates for the subject, file name, and body text, click

[Application Settings] and then [Network Scanner Settings] in "Setting mode".

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 727 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: