Sharp MX-2610N User Manual Download Page 746

Page: 746 / 1312

OPERATION GUIDE - SPECIFYING THE SEND SIZE OF THE IMAGE

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/05-041a.htm[24/03/2011 3:01:48 PM]

MX-2610N / MX-3110N / MX-3610N

SPECIFYING THE SEND SIZE OF THE IMAGE

Index

Contents

Operation

IMAGE SEND

Tap this key to specify the send size as a paper size. If the specified send size is larger than

the scan size, the image will be enlarged. If the specified send size is smaller than the scan

size, the image will be reduced.

The send size cannot be specified when [Long Size] is selected for the scan

size, or when the scan size is specified by numeric values.

The send size cannot be specified when [TIFF-S] is selected for the format in

Internet fax mode. (The send size is fixed at A4R (8-1/2" x 11"R).)

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 746 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: