OPERATION GUIDE - STORING SCAN OPERATIONS
file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/05-049a.htm[24/03/2011 3:01:57 PM]
MX-2610N / MX-3110N / MX-3610N
STORING SCAN OPERATIONS
Program
IMAGE SEND
This function collectively stores various settings as one program. The stored program can be
retrieved using an easy operation.
For example, suppose A4 (8-1/2" x 11") size documents are scanned into a file and sent to
each branch office once a month.
The same documents are sent to each branch office
Each page of a bound document is successively transmitted
Smudges on the edges of the documents are erased before transmission
When a job program is not stored
When a job program is stored
Enter the address of each branch office.
Select Dual Page Scan.
Specify Erase.
Tap the [Start] key.
Scan and send the original.
Tap the key of a stored program.
Tap the [Start] key.
Scan and send the original.
Considerable time is required to send the
documents each month because the above
settings must be selected.
In addition, mistakes are occasionally made
when selecting the settings.
When a program is stored, settings are
selected with ease by simply tapping the
key of the program.
In addition, transmission takes place based
on the stored settings so there are no
chances for mistakes.
To configure a program:
Tap the [Store Program - Set Current Store] key on the action panel that appears
when you operate any mode screens.