Sharp MX-2610N User Manual Download Page 789

Page: 789 / 1312

OPERATION GUIDE - SCANNING MANY ORIGINALS AT ONCE

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/05-056b.htm[24/03/2011 3:02:08 PM]

MX-2610N / MX-3110N / MX-3610N

SCANNING MANY ORIGINALS AT ONCE

Job build

IMAGE SEND

steps in all >

Place originals in the automatic document feeder.

The original can also be placed on the document glass.

AUTOMATIC DOCUMENT FEEDER

DOCUMENT GLASS

Specify the destination.

ENTERING DESTINATIONS

Tap the [Job Build] key.

A checkmark appears on the icon.

To cancel the Job Build setting:

Tap the [Job Build] key to clear the checkmark.

Tap the [Start] key to scan the first set.

Tap the [Preview] key to check the preview of an image before sending a fax. For

more information, see "CHECKING THE IMAGE TO BE TRANSMITTED". However,

settings for this function cannot be changed in the preview screen.

Place the next set of originals and tap the [Start] key.

To cancel scanning the original:

Tap

([STOP] key). All scanned data will be cleared.

Tap the [Read-End] key.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 789 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: