Sharp MX-2610N User Manual Download Page 970

Page: 970 / 1312

OPERATION GUIDE - USER LIST

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/07-012.htm[24/03/2011 3:03:33 PM]

Initial

Enter a maximum of 10 characters for the initials. (The initials

are optional).

Index

Select a custom index to be stored. The custom index names are

the same as those used in the address book.

User Number

Enter a user number in 5 to 8 digits.

Enter the login name that is used when authentication by login

name and password is enabled (up to 255 characters). (The login

name must be unique.)

Password

*1, 3

Enter the password, consisting of 1 to 255 characters, that is

used for user authentication by login name and password (the

password is optional).

E-mail Address

Enter the e-mail address that is used in the sender list and for

LDAP authentication (up to 255 characters).

My Folder

Store a folder to be used for document filing as the dedicate user

folder (or My folder). A stored folder can be selected, or you can

create and specify a new folder.

Authentication Settings

Select either [Login Locally] or [Network Authentication] (when

LDAP is enabled) for authentication.

User Group

Set a group to which the user belongs.

Up to 8 groups can be assigned.

Authentication Server

When the [Network Authentication] is selected, select the server

to be used for user authentication from the LDAP server list that

is stored using Setting mode (Web version).

Pages Limit Group

Specify the page limit for the user by selecting one of the stored

page limit groups. The factory default setting is [Unlimited].

For more information, see "PAGE LIMIT GROUP LIST".

Authority Group

Specify the user authority by selecting one of the stored authority

groups. The factory default setting is [User].

For more information, see "AUTHORITY GROUP LIST".

Favourite Operation Group

The favourite operation group is displayed when the user logs in.

The factory default setting is [Following the System Settings].

To change the settings, select [User Control] in Setting mode

(Web version).

It is not displayed when "User Number" is selected for the authentication method.

It is displayed only when "User Number" is selected for the authentication method.

Not required when network authentication is used, as the password stored in the LDAP server is used.

Custom Index

You can change the custom index name.

Tap the custom index name on the list to edit it.

Delete the previously entered characters and enter a new name (up to 127 characters).

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 970 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: