Sharp MX-2610N User Manual Download Page 339

Page: 339 / 1312

OPERATION GUIDE - STORING A PROGRAM

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/02-073b.htm[24/03/2011 2:58:21 PM]

MX-2610N / MX-3110N / MX-3610N

STORING A PROGRAM

COPYING

steps in all >

Tap a key not used yet for

program registration.

A key with a program stored is displayed

in colour. Tap a key with no program

stored.

If a program is not named, a

serial number is automatically

assigned instead of a program

name.

Name the program, and tap

the [OK] key.

A registration completion message

appears.

Select whether or not to

After the settings are completed, tap

Specify the copy function to be stored.

Using the base screen will display the [Program Registration] key.

Tap the [Program Registration] key on the action panel.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 339 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: