Sharp MX-2610N User Manual Download Page 814

Page: 814 / 1312

OPERATION GUIDE - ENHANCING THE OUTLINE OF THE SCANNED ORIGINAL BEFORE TRANSMISSION

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/05-065b.htm[24/03/2011 3:02:20 PM]

MX-2610N / MX-3110N / MX-3610N

ENHANCING THE OUTLINE OF THE

SCANNED ORIGINAL BEFORE

TRANSMISSION

Sharpness

IMAGE SEND

steps in all >

Tap

or slide the slider

to adjust the sharpness.

To cancel the sharpness

settings:Tap the [Off] key.

After the settings are completed, tap

and [<<Back] keys in sequence.

Place the original.

Place the original in the document feeder tray of the automatic document feeder, or on the

document glass.

AUTOMATIC DOCUMENT FEEDER

DOCUMENT GLASS

Specify the destination.

ENTERING DESTINATIONS

Tap the [Others>>] key, and tap the [Sharpness] key.

Tap the [Start] key to start scanning of the original.

Tap the [Preview] key to check the preview of an image before sending a fax. For

more information, see "CHECKING THE IMAGE TO BE TRANSMITTED". However,

settings for this function cannot be changed in the preview screen.

If you inserted the original pages in the document feeder tray, all pages are scanned.

A beep will sound to indicate that scanning and transmission have ended.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 814 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: