Sharp MX-2610N User Manual Download Page 227

Page: 227 / 1312

OPERATION GUIDE - USING TWO MACHINES TO REDUCE THE COPY TIME

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/02-029b.htm[24/03/2011 2:57:37 PM]

MX-2610N / MX-3110N / MX-3610N

USING TWO MACHINES TO REDUCE THE

COPY TIME

Tandem copy

COPYING

steps in all >

Tap the copies display key

to specify the number of
copies.

Up to 999 copies (sets) can be set. The

specified number of copies are shared

between the master and slave machines.

If the number of copies is odd, the

master machine makes more copies than

the slave machine.

Place the original and tap the [Preview] key.

Place the original in the document feeder tray of the automatic document feeder, or on the

document glass.

When using the document glass to scan multiple original pages, change the original and

tap the [Additionally Scan] key.

AUTOMATIC DOCUMENT FEEDER

DOCUMENT GLASS

Tap the [Others>>] key, and tap the [Tandem Copy] key.

A checkmark appears on the icon.

After the settings are completed, tap the [<< Back] key.

To cancel the tandem copy setting:

Tap the [Tandem Copy] key to uncheck it.

If an incorrect number of copies is set

Tap the [C] key and then enter the correct number.

Check the preview image in the preview screen.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 227 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: