Sharp MX-2610N User Manual Download Page 333

Page: 333 / 1312

OPERATION GUIDE - INTERRUPT COPY

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/02-067a.htm[24/03/2011 2:58:18 PM]

MX-2610N / MX-3110N / MX-3610N

INTERRUPT COPY

Index

Contents

Operation

COPYING

This function suspends a job in progress, and preferentially prints the original specified with

interrupt copy.

When you need to make an urgent copy and the machine is busy with a long copy run or other

job, use interrupt copy.

The [Interrupt] key does not appear while an original is being scanned.

Depending on the settings of the job in progress, the [Interrupt] key may not

appear.

Depending on the settings of the job in progress, the [Reserve] key may appear

instead of the [Interrupt] key.

Unlike interrupt copy, reserve copy does not temporarily stop the job in progress.

Instead, the reserve copy job begins when the job in progress is finished.

Interrupt copy cannot be used in combination with the following functions:

Job Build, Tandem Copy, Book Copy, Card Shot, Multi-Page Enlargement,

Original Count, Proof Copy, Preview Setting, Book Divide

When you place an original on the document glass, you cannot select the 2-

sided copying, sort mode, and staple sort features to make an interrupt copy.

If any of these functions are necessary, use the automatic document feeder.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 333 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: