Sharp MX-2610N User Manual Download Page 884

Page: 884 / 1312

OPERATION GUIDE - FILE TRANSMISSION

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/06-024a.htm[24/03/2011 3:02:58 PM]

MX-2610N / MX-3110N / MX-3610N

FILE TRANSMISSION

Index

Contents

Operation

DOCUMENT FILING

The settings used when the file was stored with document filing are stored, and thus the file

can be transmitted using those settings. If needed, you can also change the transmission

settings to modify the retrieved file.

A file saved in black and white or greyscale cannot be transmitted in colour.

A stored print job cannot be transmitted.

These transmission methods require installation of the corresponding options.

If any of the following other modes were included in the saved file, the file

cannot be transmitted.

"Pamphlet Copy", "Covers/Inserts", "Photo Repeat", "Multi-Page Enlargement",

" 2in1" for copying.

If any of the following other modes were included in the saved file, the file can

be transmitted, but other functions cannot be executed.

"Margin Shift", "Transparency Inserts", "Book Copy", "Tab Copy", "Stamp", all

"Colour Adjust" menu items, "Centring"

Depending on the reduction or enlargement ratio used when storing a file, it

may not be possible to send the stored file using a selected resolution setting.

In this event, try changing the resolution.

However, when sending a stored file by Internet fax, transmission may not be

possible even if the resolution is changed.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 884 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: