Sharp MX-2610N User Manual Download Page 538

Page: 538 / 1312

OPERATION GUIDE - FAX DEST. CONFIRMATION MODE

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/04-032.htm[24/03/2011 2:59:59 PM]

MX-2610N / MX-3110N / MX-3610N

FAX DEST. CONFIRMATION MODE

FAX

This mode displays a destination confirmation message when a fax is sent to prevent

accidental transmission to the wrong destination. Set it in setting mode. If a fax is sent while

this function is enabled, an address confirmation message will appear when the [Start] key is

tapped.

The message that appears will vary depending on the method used to specify the destination.

After tapping the [Speaker] key while "Fax Dest. Confirmation Mode" is enabled, the

destination cannot be specified using the numeric keys, one-touch key, [Call Search

Number] key, or [Select among addresses recently sent to] key. However, it is

possible to send through a telephone.

To display the destination confirmation message prior to fax
transmission:

In "Setting mode", select [System Settings] → [Image Send Settings] → [Fax
Settings] → [Default Settings] → [Fax Dest. Confirmation Mode].

To disable fax broadcast when Fax Dest. Confirmation Mode is
enabled:

In "Setting mode", select [System Settings] → [Image Send Settings] → [Fax
Settings] → [Send Settings] → [Disable Fax Broadcasting].

Destination specified by one-touch key/search number

Tap the [Start] key to display all destinations in the destination confirmation screen. Check that

the destinations are correct, and tap the [Send Confirmation] key to start scanning of the

original.

If the destination is not correct, tap the [Cancel] key and select the destination again.

You can select multiple one-touch keys for contacts or groups including fax

destinations.

Before tapping the [Send Confirmation] key, you can change scan or other

settings.

Destination specified using the numeric keys, [Select among

addresses recently sent to] key, or [Global Address Search]

key

Tap the [Start] key to display the confirmation message.

Tap the [OK] key, re-enter the destination using the numeric keys, and tap the [Send

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 538 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: