Sharp MX-2610N User Manual Download Page 907

Page: 907 / 1312

OPERATION GUIDE - SAVING IN EXTERNAL MEMORY DEVICE

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/06-036.htm[24/03/2011 3:03:10 PM]

MX-2610N / MX-3110N / MX-3610N

SAVE IN EXTERNAL MEMORY DEVICE

Index

Contents

DOCUMENT FILING

steps in all >

Specify the file name and a

folder.

For original scan settings, see

the explanation of the copy or

image send mode.

If the original is 2-sided, be

sure to tap the [Original] key

and then tap the [2-Sided

Tablet] key or the [2-Sided

Booklet] key as appropriate for

the original.

Place the original and tap the [Preview] key.

Place the original in the document feeder tray of the automatic document feeder, or on the

document glass.

AUTOMATIC DOCUMENT FEEDER

Document Glass

Tap the [Scan to External Memory Device] key on the action

panel.

Tap the [Start] key to start scanning.

A beep will sound to indicate that scanning and file store have ended.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 907 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: