OPERATION GUIDE - ERASING PERIPHERAL SHADOWS ON THE IMAGE
file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/04-063a.htm[24/03/2011 3:00:31 PM]
MX-2610N / MX-3110N / MX-3610N
ERASING PERIPHERAL SHADOWS ON THE
IMAGE
Erase
FAX
Not using the
erase function
Using the erase
function
Shadows appear in
the image.
No shadows appear.
The erase function is used to erase shadows on images produced when scanning thick
originals or books.
This function erases the parts of the image where shadows tend to form, but does not detect
shadows and erase only the shadows.
Scanning a thick book
Erase modes
If a ratio setting is used in combination with an erase setting, the erase width will
change according to the selected ratio. This function erases the parts of the image
where shadows tend to form, but does not detect shadows and erase only the
shadows.
For example, if you set an erase width of 10 mm (1/2") and reduce the image to
70% before transmission, the erase width will be reduced to 7 mm.
To change the default erase width setting:
Select [System Settings] → [Image Send Settings] → [Operation Settings] →
[Default Settings] → [Erase Width Adjustment].
The width can be set from 0 mm to 20 mm (0" to 1"). The factory default setting is