Sharp MX-2610N User Manual Download Page 440

Page: 440 / 1312

OPERATION GUIDE - PRINTING SPECIFIC PAGES ON DIFFERENT PAPER

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/03-035a.htm[24/03/2011 2:59:11 PM]

MX-2610N / MX-3110N / MX-3610N

PRINTING SPECIFIC PAGES ON

DIFFERENT PAPER

Different paper

Index

Contents

Operation

PRINTER

The front and back covers and specified

pages of a document are printed on paper

that is different from the other pages.

Use this function when you wish to print the

front and back covers on heavy paper, or

insert coloured paper or a different paper

type at specified pages.

As necessary, paper can be inserted as

insertion sheets where nothing is printed.

In a Windows environment

In a Macintosh environment

The front and back covers are printed using paper that is different from the other pages. This

function can be used, for example, when you want to print only the front cover and last page

on thick paper.

In a Macintosh environment, this function is only available when using Mac OS 9,

Mac OS X 10.4.11, 10.5 to 10.5.8, or 10.6 to 10.6.2.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 440 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: