Sharp MX-2610N User Manual Download Page 109

Page: 109 / 1312

OPERATION GUIDE - SELECTING A PROCEDURE FOR PLACING THE ORIGINAL DEPENDING ON THE TYPE AND STATUS OF THE ORIGINAL

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/01-057.htm[24/03/2011 2:56:44 PM]

Index

Contents

Before inserting originals into the document feeder tray, be sure to remove any

staples or paper clips. If they cannot be removed, use the document glass.

Originals to be placed on the document glass

Place an original on the document glass if its material is any of the those listed below.

To place an original on the document glass, see "DOCUMENT GLASS".

Pamphlet

Transparency film

Transparent material for backup copy

Tracing paper

Carbon paper

Thermal paper

Original having major creases or distortion

Original with a tear

Original with a folded part

Original having pasted parts or cut-outs

Original with a large number of punch holes for filing (Use the automatic document feeder

for originals with two or three holes.)

Original created using a thermal transfer ink ribbon (thermal transfer paper and the like)

Placing an original of the materials listed above in the automatic document feeder

may cause incorrect original size detection, original misfeeds, and smudges on

images sent or copy output.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 109 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: