Sharp MX-2610N User Manual Download Page 166

Page: 166 / 1312

OPERATION GUIDE - USING THE DOCUMENT GLASS FOR COPYING

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/02-007.htm[24/03/2011 2:57:12 PM]

MX-2610N / MX-3110N / MX-3610N

USING THE DOCUMENT GLASS FOR COPYING

COPYING

steps in all >

Make sure that the desired

paper (tray) and colour
mode are selected.

To change the paper (tray), tap the

[Paper Select] key.

SELECTING THE PAPER TRAY

FOR COPYING

To change the colour mode, tap the

[Colour Mode] key.

COPY COLOUR MODES

Place the original on the document glass, and tap the

[Preview] key.

DOCUMENT GLASS

Set the next original, and tap the [Additionally Scan] key to

scan the original.

Repeat this step until all originals have been scanned.

Tap the [Colour Start] or [B/W Start] key to start copying.

When making only one set of copies, you do not need to specify the number of copies.

To make two or more sets of copies:

Tap the copies display key to specify the number of

copies.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 166 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: