Sharp MX-2610N User Manual Download Page 267

Page: 267 / 1312

OPERATION GUIDE - MAKING A POSTER-SIZED COPY

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/02-046a.htm[24/03/2011 2:57:51 PM]

MX-2610N / MX-3110N / MX-3610N

MAKING A POSTER-SIZED COPY

Multi-page

enlargement

Index

Contents

Operation

COPYING

This function separately copies an enlarged original image on multiple sheets.

Multi-Page Enlargement must be specified before scanning the original.

Place an original on the document glass.

Overlap of sections of image

There will be a margin around the edges of each copy.

Areas for overlapping the copies will be created at the leading and trailing

edges of each copy.

The paper size, number of sheets required for the enlarged image, and the ratio

are automatically selected based on the selected original size and enlargement

size. (The paper size and ratio cannot be selected manually.)

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 267 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: