Sharp MX-2610N User Manual Download Page 470

Page: 470 / 1312

OPERATION GUIDE - DIRECTLY PRINTING A FILE IN USB MEMORY

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/03-047b.htm[24/03/2011 2:59:26 PM]

MX-2610N / MX-3110N / MX-3610N

DIRECTLY PRINTING A FILE IN USB MEMORY

PRINTER

steps in all >

Connect the USB memory device to the machine and tap

the [Document Filing] key.

Tap the [Select File from USB Memory to Print] key on the

action panel.

Tap the key of the file that you wish to print, and tap the

[Change Setting to Print] key on the action panel.

When printing multiple files, tap the keys of the files you wish to print, and tap the

[Print] key on the action panel.

The

icon appears to the left of keys of files that can be printed.

The

icon is displayed to the left of keys of folders in the USB memory device. To

display a folder or a file in a folder, tap this key.

A total of 100 keys of files and folders can be displayed.

Tap

to move up one folder level.

When you move down a folder level by tapping a folder key,

appears.

Tap this key to return to the file or folder name selection screen.

Tap the [File or Folder Name] key to change the order of the files and folders

displayed on the screen. Each time the key is tapped, the order changes

between ascending and descending.

Select the print conditions.

If you have selected multiple files in step 3, you can select only the number of prints.

If you have selected a file that includes print conditions (i.e., PCL, PS, or XPS files) in

step 3, the settings will be applied.

When the [Print on Glossy Paper] checkbox is selected, [Paper Select] is set to

[Glossy Paper] (bypass tray) and [Output Resolution] is set to [600 dpi (High

Quality)].

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 470 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: