Sharp MX-2610N User Manual Download Page 818

Page: 818 / 1312

OPERATION GUIDE - CHANGING THE PRINT SETTINGS FOR THE TRANSACTION REPORT

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/05-066b.htm[24/03/2011 3:02:21 PM]

Index

Contents

Overview

Tap the [Start] key to start scanning of the original.

Tap the [Preview] key to check the preview of an image before sending a fax. For

more information, see "CHECKING THE IMAGE TO BE TRANSMITTED".

If you inserted the original pages in the document feeder tray, all pages are scanned.

A beep will sound to indicate that scanning and transmission have ended.

If you placed the original on the document glass, scan each page one at a time.

When scanning finishes, place the next original and tap the [Start] key. Repeat the

procedure until all pages have been scanned and then tap the [Read-End] key.

A beep will sound to indicate that scanning and transmission have ended.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 818 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: