Sharp MX-2610N User Manual Download Page 320

Page: 320 / 1312

OPERATION GUIDE - REPEATING THE SAME IMAGE ON ONE SHEET

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/02-063b.htm[24/03/2011 2:58:14 PM]

Tap the [Fixed Repeat] key.

Tap the [Original] and

[Paper Select] keys to
select an original size and
a paper size, respectively.

SPECIFYING THE ORIGINAL SIZE

SELECTING THE PAPER TRAY FOR

COPYING

Place the original in the document feeder tray of the automatic document feeder, or on the

document glass.

AUTOMATIC DOCUMENT FEEDER

DOCUMENT GLASS

Check the preview image in the preview screen.

Check whether or not settings produce the required results.

To cancel all settings:

Tap the [CA] key.

Tap the [Colour Start] or [B/W Start] key to start copying.

When making only one set of copies, you do not need to specify the number of copies.

To make two or more copies,

tap the copies display key to set a number of copies.

Copy by specifying a repeat count (Fixed Repeat)

< 8 steps in all >

Tap the [Others>>] key, and then tap the [Repeat Layout]

key.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 320 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: