Sharp MX-2610N User Manual Download Page 372

Page: 372 / 1312

OPERATION GUIDE - PRINTING IN A MACINTOSH ENVIRONMENT (WHEN USER AUTHENTICATION IS USED)

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/03-005a.htm[24/03/2011 2:58:36 PM]

MX-2610N / MX-3110N / MX-3610N

PRINTING IN A MACINTOSH

ENVIRONMENT (WHEN USER

AUTHENTICATION IS USED)

Index

Contents

Operation

PRINTER

The user information (such as login name and password) that must be entered varies

depending on the authentication method being used, so check with the administrator of the

machine before printing.

The menu used to execute printing may vary depending on the application.

The machine name that normally appears in the "Printer" menu is [SCxxxxxx].

("xxxxxx" is a sequence of characters that varies depending on the machine

model.)

When black and white printing is set in the printer driver, printing is possible

without entering user information.

For black and white print settings, see "Black and white printing".

The number of pages printed is added to the "Other User" count. In this case,

other print functions may be restricted. For more information, ask your

administrator.

To prohibit printing by users whose user information is not stored in
the machine:

In "Setting mode", select [User Control] → [Default Settings] → [Disable Printing by
Invalid User].

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 372 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: