Sharp MX-2610N User Manual Download Page 494

Page: 494 / 1312

OPERATION GUIDE - CHANGING THE RENDERING METHOD AND PRINTING JPEG IMAGES

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/03-066a.htm[24/03/2011 2:59:38 PM]

MX-2610N / MX-3110N / MX-3610N

CHANGING THE RENDERING METHOD

AND PRINTING JPEG IMAGES

Process JPEG images

using the driver

Index

Contents

Operation

PRINTER

In some situations, a document containing a JPEG image may not be printed correctly. This

can be solved by changing the way the JPEG image is rendered.

When you print an original containing JPEG images, this function allows you to select whether

the images are rendered in the printer driver or the machine.

This function is available in a Windows environment.

When images are rendered in the printer driver, it may take time until the printing

is completed.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 494 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: