Sharp MX-2610N User Manual Download Page 1260

Page: 1260 / 1312

OPERATION GUIDE - THE OPERATION PANEL CANNOT BE USED

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/08-019-02.htm[24/03/2011 3:05:31 PM]

MX-2610N / MX-3110N / MX-3610N

THE OPERATION PANEL CANNOT BE USED

TROUBLESHOOTING

Point to check

Solution

Is the main power indicator lit?

If the main power indicator is not lit
up, turn the machine's power on.

Make sure that the power plug is firmly

inserted in the power outlet, switch the main

power switch to the "

" position, and press

the [Power] button to turn on the power.

Did you just power on the machine?

Wait until a message appears
indicating that the machine is ready.

After the [Power] button is turned on, the

machine requires some time to complete

warmup operation. During warmup operation,

functions can be selected, but a job cannot be

run.

Is the [Power Save Mode] button blinking?

Auto Power Shut-Off mode has
activated. To return the machine to
normal operation, press the [Power
Save Mode] button.

- "AUTO POWER SHUT-OFF TIMER"

Is a cover open or a device separated from

the machine?

Read the message and take
appropriate actions.

A warning message will appear when a cover

is open or a device is separated from the

machine.

Did login fail three times in a row?

After operation unlocks, log in using
the correct user information.

When [A Warning when Login Fails] is

enabled in the setting mode and login fails 3

times in a row, a warning will be displayed

and user authentication operation will lock for

5 minutes. (If you do not know your user

information, contact your administrator.)
"Setting mode" → [User Control] → [Default
Settings] → [A Warning when Login Fails]

Does a message appear indicating that Auto

Check with your administrator.

Auto Login failed due to network or other

problems. If you are the administrator, tap the

[Administrator Password] key, log in as an

«
...
1258
1259
1260
1261
1262
...
»

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 1260 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: