Sharp MX-2610N User Manual Download Page 1210

Page: 1210 / 1312

OPERATION GUIDE - THE IMAGE IS UPSIDE DOWN

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/08-008-06.htm[24/03/2011 3:05:04 PM]

MX-2610N / MX-3110N / MX-3610N

THE IMAGE IS UPSIDE DOWN

TROUBLESHOOTING

If you are unable to solve a problem using the solutions in this manual, press the [Power]

button and then turn the main power switch to the "

"position. Wait at least 10 seconds and

then turn the main power switch to the "

"position. After the main power indicator colour

changes from orange to green, press the [POWER] button.

When the background colour of the job status display at the upper right corner of

the touch panel is not grey, do not switch off the main power switch or unplug the

power plug. This may damage the hard drive or cause the data being stored or

received to be lost.

Point to check

Solution

Are you using a type of paper (tab paper,

punch paper, etc.) that can only be loaded in

a fixed orientation?

Rotate the image 180 degrees before
printing.

When the image size and paper size are the

same but the orientations are different, the

orientation of the image is automatically

rotated to match the paper. However, when

the paper can only be loaded in a fixed

orientation, the image may be printed upside

down. In this event, rotate the image 180

degrees before printing.

Windows: The setting is selected in the [Main]

tab of the printer driver.

Macintosh (OS X 10.3.9 to 10.5.1): The

setting is selected using the [Page Setup]

menu. (Landscape orientation only)

(In Mac OS 9.0 to 9.2.2, the setting is

selected in the [PostScript Options] menu of

the [Page Setup] menu.)

Is the correct binding position selected for 2-

sided printing?

Be sure to set the appropriate
binding position.

When 2-sided printing is performed, every

other page is printed upside down when tablet

binding is selected for the binding position.

Windows: The setting is selected in the [Main]

tab of the printer driver.

Macintosh: The setting is selected in the

[Layout] menu of the print window.

(In Mac OS 9.0 to 9.2.2, the setting is

«
...
1208
1209
1210
1211
1212
...
»

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 1210 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: