Sharp MX-2610N User Manual Download Page 234

Page: 234 / 1312

OPERATION GUIDE - INSERTING COVERS IN COPIES

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/02-030a.htm[24/03/2011 2:57:38 PM]

Inserts a front cover at the beginning of copies, and makes

a 2-sided copy on the fifth and sixth original pages for back

cover.

1-sided copy

Makes a 1-sided copy on the first original page for front

cover, and also makes a 1-sided copy on the sixth original

page for back cover. The second and the fifth original

pages are not copied.

1-sided copy

2-SIDED

COPY

Makes a 1-sided copy on the first original page for front

cover, and also makes a 2-sided copy on the fifth and sixth

original pages for back cover.

* The second original page is not copied.

2-SIDED

COPY

1-sided copy

Makes a 2-sided copy on the first and second original

pages for front cover, and also makes a 1-sided copy on

the sixth original page for back cover.

* The fifth original page is not copied.

2-SIDED

COPY

2-SIDED

COPY

Makes a 2-sided copy on the first and second original

pages for front cover, and also makes a 2-sided copy on

the fifth and sixth original pages for back cover.

Before using the covers/inserts function, load insertion sheets in the tray.

When selecting the covers/inserts function, place the originals in the document

feeder tray, select 1-sided or 2-sided copying, and select the number of copies

and any other desired copy settings. When these settings have been completed,

perform the procedure to select covers/inserts.

One sheet can be inserted for each of front and back covers.

When performing 2-sided copying of 2-sided originals, an insertion sheet cannot

be inserted between the front and reverse sides of an original.

This function cannot be used in combination with the saddle stitch function.

This setting is not available when the covers/inserts function is disabled in

"Setting mode".

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 234 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: