Sharp MX-2610N User Manual Download Page 697

Page: 697 / 1312

OPERATION GUIDE - IMAGE SEND SEQUENCE

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/05-017.htm[24/03/2011 3:01:20 PM]

MX-2610N / MX-3110N / MX-3610N

IMAGE SEND SEQUENCE

IMAGE SEND

Place the original in the document feeder

tray of the automatic document feeder, or on

the document glass.

AUTOMATIC DOCUMENT FEEDER

DOCUMENT GLASS

Tap the address key to directly enter the

destination, and specify the address to send

scan data.

ENTERING DESTINATIONS

Specify the original scan size, exposure, file

format, and other items.

IMAGE SETTINGS

First, to place the machine in a desired image send mode, tap the appropriate icon in the

Home screen.

CHANGING MODES

1 Place the original.

2. Enter the destination.

3. Configure the scan settings.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 697 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: