Sharp MX-2610N User Manual Download Page 583

Page: 583 / 1312

OPERATION GUIDE - CHECKING THE IMAGE BEFORE PRINTING

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/04-056b.htm[24/03/2011 3:00:23 PM]

Index

Contents

Overview

[Print] key on the action
panel to print the image.

[Select All Page]: Selects all displayed

images.

[Release All Page]: Cancels all

images that have been selected by

"Select All".

: Use these keys to enlarge or

reduce an image.

: Rotates image

counterclockwise or clockwise.

A preview image is an image for the touch panel. It will differ from the actual print

result.

Tap the [Erase Specified Range] key to delete unwanted area of the image.

Specify the image area you wish to delete in the Erase Specified Range screen.

To forward the selected image, tap the [Forward] key.

FORWARDING RECEIVED DATA MANUALLY

To save the selected image, tap the [Save to HDD] key.

SAVING RECEIVED DATA

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 583 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: