Sharp MX-2610N User Manual Download Page 959

Page: 959 / 1312

OPERATION GUIDE - TOP PAGE

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/07-004.htm[24/03/2011 3:03:29 PM]

MX-2610N / MX-3110N / MX-3610N

TOP PAGE

SETTING MODE

The top page displays the system information of the machine.

It displays the model name, current status, and machine location.

Item

Description

[Update] key

Updates the information displayed.

Unit Serial Number

Indicates the serial number of the machine.

Name

If [Name] is not set, [Not Set] appears.

When you tap the [Not Set] key, the [Machine

Identification] screen appears.

Model Name

Displays the standard model name of the

machine.

Machine Location

The information entered in the [Machine

Location] item in [Machine Identification]

appears.

If no name has been set, [Not Set] appears.

Current Status

Displays the current status of the machine.

The display status depends on the PAU

display format.

If two or more errors occur at the same time,

only one status is displayed according to the

priority order.

The errors are displayed in the following

priority order.

Printer error

Account Limit

Incorrect Paper

Overdue Service Maintenance

Paper Jam

Marker Supply Missing

Toner Empty

Replace Used Toner Container.

Cover Open

Paper Empty

Input Tray Empty

Specified Input Tray Open

Specified Output Tray Full

Offline

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 959 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: