Sharp MX-2610N, User Manual, Page: 1060 / 1312

OPERATION GUIDE - INTERNET FAX SETTINGS
file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/07-037-03.htm[24/03/2011 3:04:09 PM]
MX-2610N / MX-3110N / MX-3610N
INTERNET FAX SETTINGS
SETTING MODE
Settings related to the image send function (Scan, Internet fax, etc.) can be configured.
For an explanation of settings related to the fax function, see "IMAGE SEND
SETTINGS - FAX FUNCTIONS."
These settings can be configured when the Internet fax expansion kit is installed.
Default Settings
Configures the default settings for Internet fax.
Auto Wake Up Print
When the [Power] button is "Off" (but the main power switch is " ") and an Internet fax is
received, this function activates the machine and prints the fax.
When this function is disabled, received Internet faxes are not printed until the ([Power] button)
is switched "On".
Compression Setting
This is used to set the default compression mode for Internet fax transmission.
The following settings can be configured.
MH (G3)
MMR (G4)
Speaker Volume Setting
Adjusts the volume of fax receive signals and communication error signals heard through the
speaker.
A fax receive signal sounds after the machine checks the mail server and retrieves received
faxes. A communication error signal sounds when a delivery failed e-mail is received from the
destination Internet fax machine.
Original Print on Transaction Report
When a transaction report is printed, this is used to print part of the first page of the transmitted
original on the transaction report. Select one of the settings below.
Print Out All Report
Print Out Error Report Only
Do not Print