Sharp MX-2610N User Manual Download Page 615

Page: 615 / 1312

OPERATION GUIDE - SENDING TWO PAGES AS A SINGLE PAGE

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/04-067b.htm[24/03/2011 3:00:38 PM]

MX-2610N / MX-3110N / MX-3610N

SENDING TWO PAGES AS A SINGLE PAGE

2in1

FAX

steps in all >

Tap the [Image Orientation]

key with the same
orientation as the placed
original.

If this setting is not correct, a suitable

image may not be transmitted.

After the settings are completed, tap

Place the original.

Place the original in the document feeder tray of the automatic document feeder, or on the

document glass.

AUTOMATIC DOCUMENT FEEDER

DOCUMENT GLASS

Enter the destination fax number.

ENTERING DESTINATIONS

Tap the [Others >>] key, and tap the [2in1] key.

A checkmark appears on the icon.

To cancel the 2in1 setting:

Tap the [2in1] key to clear the checkmark.

After the settings are completed, tap the [<< Back] key.

Tap the [Original] key.

Tap the [Start] key to start scanning of the original.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 615 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: