Sharp MX-2610N User Manual Download Page 821

Page: 821 / 1312

OPERATION GUIDE - COMPLETED TRANSMISSION/RECEPTION JOBS

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/05-069.htm[24/03/2011 3:02:24 PM]

MX-2610N / MX-3110N / MX-3610N

COMPLETED TRANSMISSION/RECEPTION JOBS

IMAGE SEND

A usual transmission job moves to the job list when transmission is completed. Then the status

field displays "Send OK". However, Internet Fax jobs such as reception, timer transmission,

retries, and forwarding are displayed in the job status screen as follows:

Reception job

During Internet Fax receiving, the status field displays "Receiving" in the job queue list. When

reception is completed, the job moves to the completed job list and the status field displays "In

Memory". After Internet Fax printing is completed, the status changes to "Received".

Timer transmission jobs

A timer transmission job appears at the end of the job queue list until the specified time is

reached.

The job is printed at the specified time, and moves to the completed job list. If another job is

being printed at the specified time, the job being printed is prioritized over the timer job.

Internet Fax transmission job with reception report request

specified

An Internet Fax transmission job with a reception report request specified, excluding a direct

SMTP transmission job, is placed into the standby state at the bottom of the Job Queue screen

after a transmission has been completed. "Completed Waiting" appears in the status field.

The screen changes to the completion screen when a reception report e-mail has been

received from the destination or it could not be received within the prespecified time.

Reception jobs when the inbound routing settings are enabled

When the inbound routing settings are enabled, reception jobs are handled as follows

depending on the print setting.

FORWARDING RECEIVED DATA TO PRESET DESTINATIONS (Inbound routing

settings)

Received data is not printed

When a data is being received, "Receiving" appears in the job queue list. When the reception

is completed, the status changes to "Waiting".

Received Internet fax is printed

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 821 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: