Sharp MX-2610N User Manual Download Page 788

Page: 788 / 1312

OPERATION GUIDE - SCANNING MANY ORIGINALS AT ONCE

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/05-056a.htm[24/03/2011 3:02:07 PM]

MX-2610N / MX-3110N / MX-3610N

SCANNING MANY ORIGINALS AT ONCE

Job build

Index

Contents

Operation

IMAGE SEND

This function lets you separate an original consisting of numerous pages into sets, scan each

set using the automatic document feeder, and transmit the pages in a single transmission. You

can also send a fax by placing originals in both the automatic document feeder and on the

document glass.

Use this function when there are more original pages than can be placed at once in the

automatic document feeder.

When scanning originals that are separated into sets, scan the set that has the first page first.

The settings that you select for the first set can be used for all remaining sets.

Up to 999 pages can be scanned.

Note that when the memory is being used for other jobs, fewer pages can be

scanned.

If the memory becomes full during scanning, a message will appear and the

transmission will be cancelled.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 788 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: