OPERATION GUIDE - CHECKING THE IMAGE BEFORE PRINTING
file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/04-056a.htm[24/03/2011 3:00:23 PM]
MX-2610N / MX-3110N / MX-3610N
CHECKING THE IMAGE BEFORE PRINTING
FAX
Check the image of received data on the touch panel before printing.
This function is available when [System Settings] → [Operation Settings] → [Preview Setting]
→ [Received Data Image Check Setting] is enabled
*
in "Setting mode".
* The factory default setting is disabled.
Important points when using this function
If the received fax data is not printed or deleted, the fax memory will run low, and the machine
will not be able to receive any faxes. When using this function, you should print the received
data as soon as possible without leaving it in the fax memory.
The amount of free fax memory space is shown in the system area at the top of the screen.
Depending on the size of the received data, part of the check image on the touch
panel may not appear.
The received data list can be also shown in the job status screen that appears
when you tap the job status display.
The received data can be forwarded, deleted, or saved from the received data list.