Sharp MX-2610N User Manual Download Page 676

Page: 676 / 1312

OPERATION GUIDE - RELAY REQUEST TRANSMISSION USING F-CODES

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/04-095b.htm[24/03/2011 3:01:08 PM]

Index

Contents

Overview

If you inserted the original pages in the document feeder tray, all pages are scanned.

A beep will sound to indicate that scanning and transmission have ended.

If you placed the original on the document glass, scan each page one at a time.

When scanning finishes, place the next original and tap the [Start] key. Repeat until all

pages have been scanned and then tap the [Read-End] key.

A beep will sound to indicate that scanning and transmission have ended.

When the relay machine receives the fax, it will automatically transfer the fax to the

destination machines programmed in the memory box.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 676 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: