Sharp MX-2610N User Manual Download Page 862

Page: 862 / 1312

OPERATION GUIDE - INFORMATION ADDED TO FILES

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/06-009.htm[24/03/2011 3:02:47 PM]

MX-2610N / MX-3110N / MX-3610N

INFORMATION ADDED TO FILES

Index

Contents

DOCUMENT FILING

When saving a file using "File", add the

following information to distinguish it from

other files.

- User Name:

Use this to specify the owner of the file. The user name must first
be registered by selecting [User Control] in "Setting mode" →
[User List].

- File Name:

Set it when assigning a file name.

- Stored to:

Select which folder the file will be saved in.

- Property:

Sharing, Protect, or Confidential can be selected. When you select

Confidential, set a password (1 to 32 digits) for the file.

The above information cannot be specified when a file is saved with Quick File.

To store a user name:

In "Setting mode", select [User Control] → [User List].

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 862 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: