Sharp MX-2610N User Manual Download Page 110

Page: 110 / 1312

OPERATION GUIDE - OPERATION OF FREQUENTLY USED KEYS

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/01-060.htm[24/03/2011 2:56:45 PM]

MX-2610N / MX-3110N / MX-3610N

OPERATION OF FREQUENTLY USED KEYS

OPERATIONS COMMON TO ALL MODES

Tap a number to enter it.

To clear the entered number, tap the [C]

key.

In fax mode, you can enter

characters other than numbers,

and a different key layout is

provided.

Tap to perform a print or send job.

In copy mode, [B/W Start] and

[Colour Start] keys are displayed.

Tap to cancel all settings and restore the

initial status in each mode.

Numeric keys

[Start] key ([B/W Start] key and [Colour Start] key)

[STOP] key ([Cancel Copy] key)

[CA] key

Numeric keys

[Start] key ([B/W Start] key and [Colour Start] key)

[STOP] key ([Cancel Copy] key)

Tap to stop a print or send job.

In copy mode, the [Cancel Copy] key is displayed.

[CA] key

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 110 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: