Sharp MX-2610N User Manual Download Page 237

Page: 237 / 1312

OPERATION GUIDE - INSERTING COVERS IN COPIES

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/02-030b.htm[24/03/2011 2:57:39 PM]

Index

Contents

Overview

If the cover will be copied on, label sheets, transparency film, and tab paper cannot

be used. If not copied on, tab paper can be inserted.

After the settings are completed, tap

and [<<Back] keys in sequence.

To cancel cover sheet insertion:

Tap the [Off] key.

Check the preview image in the preview screen.

Check whether or not settings produce the required results.

To cancel all settings:

Tap the [CA] key.

Tap the [Colour Start] or [B/W Start] key to start copying.

When making only one set of copies, you do not need to specify the number of copies.

To make two or more sets of copies:

Tap the copies display key to specify the number of

copies.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 237 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: