Sharp MX-2610N User Manual Download Page 597

Page: 597 / 1312

OPERATION GUIDE - STORING FAX OPERATIONS

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/04-062a.htm[24/03/2011 3:00:30 PM]

Index

Contents

Operation

Tap the [Store Program - Set Current Store] key that appears on the action panel

when you operate any mode screens.

The settings stored in a program will be retained even after the program is used

for transmission. The same settings can be used repeatedly for transmission.

The following contents cannot be stored in programs:

Tapping the [Speaker] key, Custom Size, Card Shot, page move and

unspecified erase during preview, Metadata Entry, Send Settings, and Own

Name Select.

Up to 48 programs can be stored.

Up to 500 destinations can be stored in one program.

A program in which sub addresses and passcodes are specified as an F-code

destination records all sub addresses and passcodes.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 597 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: