Sharp MX-2610N User Manual Download Page 883

Page: 883 / 1312

OPERATION GUIDE - BATCH PRINTING

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/06-023.htm[24/03/2011 3:02:57 PM]

Index

Contents

When printing with the number of copies at data saving, go to step 7.

Use

to specify the number of copies.

As required, directly tap the numeric value display key and change the value using the

numeric keys.

To automatically delete the file after printing, tap the

[Delete] key.

Tap the [Start] key to start printing.

If there are no files that match the search conditions, you will return to the file list screen.

It the [Delete the Data] key on the action panel is tapped, all files that match the

current search conditions will be deleted.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 883 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: