Sharp MX-2610N User Manual Download Page 177

Page: 177 / 1312

OPERATION GUIDE - COPY COLOR MODES

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/02-010b.htm[24/03/2011 2:57:16 PM]

Index

Contents

Overview

Tap the [Colour Mode] key.

Tap the [Single Colour] key.

Tap the [Change] key.

Tap a colour you wish to

use.

After the settings are completed, tap the

key on the [Single Colour] screen,

and check that the changed setting is

displayed at the side of [Single Colour]

key on the colour mode screen.

After you have checked it, tap

on the

[Colour Mode] screen.

Specify the colour to change the extracted colour to.

After the settings are completed, tap the

key on the [2 Colour] screen, and check that

the changed setting is displayed at the side of [2 Colour] key on the colour mode screen.

After you have checked it, tap

Check that the specified colour mode is selected.

Copying in single colour

The original is copied in any one colour.

< 4 steps in all >

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 177 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: