Sharp MX-2610N User Manual Download Page 282

Page: 282 / 1312

OPERATION GUIDE - ADJUSTING RED/GREEN/BLUE IN COPIES

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/02-051b.htm[24/03/2011 2:57:58 PM]

MX-2610N / MX-3110N / MX-3610N

ADJUSTING RED/GREEN/BLUE IN COPIES

RGB

COPYING

steps in all >

Tap the key of the colour

you want to adjust.

Tap

or slide the slider

to adjust the colouring.

After the settings are completed, tap

and [<<Back] keys in sequence.

Only one colour can be adjusted.

(If you adjust one colour and then

adjust another colour, the

adjustment of the first colour is

cancelled.)

Tap the [Others>>] key, and tap the [RGB] key.

To cancel the RGB adjust setting:

Tap the [Cancel] key.

Place the original and tap the [Preview] key.

Place the original in the document feeder tray of the automatic document feeder, or on the

document glass.

AUTOMATIC DOCUMENT FEEDER

DOCUMENT GLASS

Check the preview image in the preview screen.

Check whether or not settings produce the required results.

To cancel all settings:

Tap the [CA] key.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 282 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: