Sharp MX-2610N User Manual Download Page 464

Page: 464 / 1312

OPERATION GUIDE - AUTOMATICALLY PRINT ALL STORED DATA

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/03-044b.htm[24/03/2011 2:59:23 PM]

MX-2610N / MX-3110N / MX-3610N

AUTOMATICALLY PRINT ALL STORED DATA

Index

Contents

Overview

PRINTER

steps in all >

Enter your user number or login name and password in the

user authentication screen of the machine.

At the time of retention print, in addition to the user authentication information, enter the

user name stored in the machine in "User Name" of "Default Job ID" in the printer driver.

A confirmation prompt will appear. Tap the [OK] key.

The print files stored in the quick file folder, main folder, and custom folder will be printed

automatically and then deleted.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 464 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: