Sharp MX-2610N User Manual Download Page 140

Page: 140 / 1312

OPERATION GUIDE - EDITING/DELETING ADDRESSES IN ADDRESS BOOK

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/01-076.htm[24/03/2011 2:56:56 PM]

You can change the publicity scope.

SETTING THE SCOPE FOR

PUBLICIZING CONTACTS AND

GROUPS

Select a "Contacts" or

"Group", and tap the [Edit]
key on the action panel.

Only one contact or group can be

selected. If more than one is selected,

the [Edit] key does not appear.

Tap the [Registered

Address Review] key on
the action panel.

Select an address from the

list of registered addresses
and tap the [Edit] key on
the action panel.

To delete an address, tap the [Delete]

The address type cannot be changed.

Editing/deleting addresses

< 5 steps in all >

In the address book screen, tap the [Register/Edit Address.]

key on the action panel, or tap the [Register/Edit Address in
Address Book] icon in the home screen.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 140 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: