Sharp MX-2610N User Manual Download Page 216

Page: 216 / 1312

OPERATION GUIDE - MAKING COPIES IN PAMPHLET FORMAT

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/02-026b.htm[24/03/2011 2:57:33 PM]

MX-2610N / MX-3110N / MX-3610N

MAKING COPIES IN PAMPHLET FORMAT

Pamphlet copy

COPYING

steps in all >

Select the binding edge.

To cancel the pamphlet staple

settings

Tap the [Off] key.

Tap the [1-Sided] or [2-

Sided] key to meet the
original.

When not inserting a cover, go to step 6.

Place the original and tap the [Preview] key.

Place the original in the document feeder tray of the automatic document feeder, or on the

document glass.

AUTOMATIC DOCUMENT FEEDER

DOCUMENT GLASS

If the originals are 2-sided, place them in the document feeder tray.

Tap the [Others>>] key, and tap the [Pamphlet Copy] key.

When inserting a cover, tap the [Cover Setting] key, and tap

the [On] key.

To change the cover input tray:

Tap the [Paper Tray] key to display the tray selection screen.

Tap the cover input tray on the tray selection screen.

For more information, see "SELECTING THE PAPER TRAY FOR COPYING".

If the cover will be copied on, label sheets, transparency film, and tab paper cannot

be used.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 216 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: