Sharp MX-2610N User Manual Download Page 961

Page: 961 / 1312

OPERATION GUIDE - DEVICE STATUS

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/07-005.htm[24/03/2011 3:03:30 PM]

MX-2610N / MX-3110N / MX-3610N

DEVICE STATUS

Index

Contents

SETTING MODE

This screen shows the device status.

Item

Description

[Update] button

Updates the information displayed.

[Back] button

Returns to the top page.

Paper Input Tray Status

Displays the current status of the paper trays

installed in the machine.

Output Tray Status

Displays the current status of the output tray

installed in the machine.

Supply Status

Displays the current status of supplies.

If staples are installed, their status is

displayed.

Device Configuration

Displays the information of options installed in

the machine.

HDD Status

Displays the usage status of the hard disk

drive.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 961 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: