Sharp MX-2610N User Manual Download Page 623

Page: 623 / 1312

OPERATION GUIDE - SENDING ORIGINALS OF DIFFERENT SIZES

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/04-070a.htm[24/03/2011 3:00:41 PM]

MX-2610N / MX-3110N / MX-3610N

SENDING ORIGINALS OF DIFFERENT

SIZES

Mixed size original

Index

Contents

Operation

FAX

This feature lets you scan and transmit

originals of different sizes at the same time;

for example, B4 (8-1/2" x 14") size originals

mixed together with A3 (11" x 17") size

originals.

When scanning the originals, the machine

automatically detects the size of each

original.

This feature can only be used with the following combinations of original sizes:

A3 and B4, A3 and B5, B4 and A4, A4 and B5

A4R and B5, B4 and A4R, B4 and A5, B5 and A5

11" x 17" and 8-1/2" x 14", 11" x 17" and 8-1/2" x 13", 11" x 17" and 5-1/2" x 8-1/2"

Once mixed size originals has been selected, an original scan size cannot be

specified.

Once the original scan size has been selected, Mixed Size Original cannot be

specified.

When Mixed Size Original is enabled, 2-sided scanning is not available.

Rotate cannot be used when Mixed Size Original is enabled.

This function is not available if [System Settings] → [Device Control] → [Original
Size Detector Setting] is set to "AB-3" in "Setting mode".

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 623 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: