Sharp MX-2610N, User Manual, Page: 819 / 1312

OPERATION GUIDE - ADDING YOUR SENDER INFORMATION TO FAXES
file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/05-067.htm[24/03/2011 3:02:22 PM]
MX-2610N / MX-3110N / MX-3610N
ADDING YOUR SENDER INFORMATION TO
FAXES
I-Fax own address send
Index Contents
IMAGE SEND
Your sender information (date, time, sender name, sender address, number of pages) is
automatically added to the top of the file you transmit.
This function cannot be used in scan mode or data entry mode.
Example of the sender information printed
Storing and setting sender information
Date, time: In "Setting mode", select [System Settings] → [Default Settings] →
[Clock Adjust].
Sender name, sender address: In "Setting mode", select [System Settings] →
[Image Send Settings] → [Operation Settings] → [Own Number and Name Set]
→ [Sender Data Registration]. If you intend to use the I-Fax Own Address
Send function, be sure to configure this information.
Page numbers: Select whether or not to include page numbers using [System
Settings] → [Image Send Settings] → [Internet Fax Settings] → [Send Settings]
→ [Printing Page Number at Receiver] in "Setting mode".
Position of sender information
The sender information is printed at the top of the scanned image data. This
makes the transmission data longer than the scan size, so it may be reduced
or divided onto two pages when printed by the receiving machine.
Date, time: The date and time
of transmission. (1)
Sender name: The sender
name programmed in the
machine. (2)
Source Address (3)
Page numbers: Page
number/total pages (4)