Sharp MX-2610N User Manual Download Page 784

Page: 784 / 1312

OPERATION GUIDE - WHITENING FAINT COLORS IN THE IMAGE

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/05-054b.htm[24/03/2011 3:02:05 PM]

Index

Contents

Overview

If you inserted the original pages in the document feeder tray, all pages are scanned.

A beep will sound to indicate that scanning and transmission have ended.

If you placed the original on the document glass, scan each page one at a time.

When scanning finishes, place the next original and tap the [Start] key.

A beep will sound to indicate that transmission has ended.

When the colour mode setting is [Mono2], the suppress background function will not

operate.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 784 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: